1 / 2
Jūs maksājat droši, izmantojot Biklo
Quantor Urkraft handmade frame with Pinion C1.12 12 speed gearbox
Meklēja
Individuāls
Kā izvairīties no krāpniecības, lasiet šeit
- Ražotāji
- Altă Marcă
- Būklė
- Gandrīz jauns
- Medžiaga
- alumīnija
- Dviračio tipas
- MTB
- Vairo vamzdis
- konusveida
- BB plotis
- 83 mm
- Sėdynės stulpelio skersmuo
- 31,6 mm
- Dropout plotis
- 148 mm x 12 mm (pastiprinājums)
- Ratų skersmuo
- 29"
Selling here a handmade Quantor aluminum frameset with a Pinion C1.12 gearbox for sale.
I bought this as a working hub motor ebike.
I had big plans for it, sold off the 36v ebike system, and bought an 1000W motor.
It did not fit, time has passed and I lost interest.
It can be used as an ebike or a normal bike.
The gearbox is a 12 speed Pinion, and the frame is a 29" manually manufactured MTB frame, with
a plaque of the builder's name. It is quite high end. Officially it is XL, but I did not find it too big for average hight. I will list the measurements at the end.
It comes with cranks, carbon belt, rear Pinion cog and spacers, seat post clamp and head bearings. The rear brake will be removed before selling.
The frameset is located in the EU, Romania, and I'd prefer local pick-up, but I can ship it within the EU, or even Worldwide.
If you want worldwide shipping, you have to help find a courier service.
It is a very rare frameset as it was originally built as an ebike, so I think 1600 euro is a reasonable price for it.
The URKRAFT frame offers the following highlights:
- fully internally installed cables (internal Smart.Shift battery possible)
- slidable dropout to tension the strap/chain
- divisible rear suspension (for mounting the belt)
- 2.6" tyre clearance
- tapered head tube with semi-integrated headset (steering stop possible)
- 12x148mm Boost through axle (12x142mm with changed dropout possible)
- three bottle cage holders
- mounts for rack and mudguard
- in the exchangeable dropout integrated KSA 18 stand mount
- internal cable routing for Vario seatposts
Geometry
Size XL
Wheel size: 29"
Head tube angle: 69.5°
Seat tube angle: 72.5°
Bottom bracket height: 60mm
Seat tube length: 520mm
Top tube length (horizontal): 640mm
Head tube: 150mm
Wheelbase min.: 1143mm
Chain stays (direct) min.: 442mm
Reach: 432mm
Stack: 661mm
- Ražotāji
- Altă Marcă
- Būklė
- Gandrīz jauns
- Medžiaga
- alumīnija
- Dviračio tipas
- MTB
- Vairo vamzdis
- konusveida
- BB plotis
- 83 mm
- Sėdynės stulpelio skersmuo
- 31,6 mm
- Dropout plotis
- 148 mm x 12 mm (pastiprinājums)
- Ratų skersmuo
- 29"
Selling here a handmade Quantor aluminum frameset with a Pinion C1.12 gearbox for sale.
I bought this as a working hub motor ebike.
I had big plans for it, sold off the 36v ebike system, and bought an 1000W motor.
It did not fit, time has passed and I lost interest.
It can be used as an ebike or a normal bike.
The gearbox is a 12 speed Pinion, and the frame is a 29" manually manufactured MTB frame, with
a plaque of the builder's name. It is quite high end. Officially it is XL, but I did not find it too big for average hight. I will list the measurements at the end.
It comes with cranks, carbon belt, rear Pinion cog and spacers, seat post clamp and head bearings. The rear brake will be removed before selling.
The frameset is located in the EU, Romania, and I'd prefer local pick-up, but I can ship it within the EU, or even Worldwide.
If you want worldwide shipping, you have to help find a courier service.
It is a very rare frameset as it was originally built as an ebike, so I think 1600 euro is a reasonable price for it.
The URKRAFT frame offers the following highlights:
- fully internally installed cables (internal Smart.Shift battery possible)
- slidable dropout to tension the strap/chain
- divisible rear suspension (for mounting the belt)
- 2.6" tyre clearance
- tapered head tube with semi-integrated headset (steering stop possible)
- 12x148mm Boost through axle (12x142mm with changed dropout possible)
- three bottle cage holders
- mounts for rack and mudguard
- in the exchangeable dropout integrated KSA 18 stand mount
- internal cable routing for Vario seatposts
Geometry
Size XL
Wheel size: 29"
Head tube angle: 69.5°
Seat tube angle: 72.5°
Bottom bracket height: 60mm
Seat tube length: 520mm
Top tube length (horizontal): 640mm
Head tube: 150mm
Wheelbase min.: 1143mm
Chain stays (direct) min.: 442mm
Reach: 432mm
Stack: 661mm
Vai jūs pārbaudāt produktu sanāksmē? Tiekoties ar pārdevēju, pirms darījuma apstiprināšanas pārbaudiet preci.
Aizsargāts maksājums Nauda pārdevējam tiek izsniegta tikai pēc tam, kad esat apstiprinājis piegādi ar drošības kodu.
Vai neesi apmierināts? Ja prece neatbilst pasūtījumam, neapstipriniet darījumu, un jūsu nauda tiks atgriezta pilnībā.
jautājums
Neietver kontaktinformāciju — tālruņa vai e-pasta ziņojumi tiek pārbaudīti manuāli.
Šim produktam vēl nav jautājumu. Esiet pirmais, kas uzdod jautājumu.
Atjaunināts: Skati: 96ID: 261507
Nosūtīt sludinājumu
Ziņojums
PĀRDEVĒJS
- Identitāte
- Verificēta e-pasta adrese un tālruņa numurs
- Konts
- Verificēts maksājumiem
- Dalībnieks
- 2021. gada 30. jūnijs
Kā tas darbojas (apmaksa un piegāde)
- 1
Jūs maksājat, izmantojot Biklo
Jūsu nauda ir droši aizsargāta.
- 2
Pārdevējs piegādā paku
Mēs nosūtām etiķeti, pārdevējs piegādā paku.
- 3
Jūs saņemat izsekošanas informāciju un pārbaudāt produktu
Jūs saņemat izsekošanas informāciju pa e-pastu un savā kontā.
- 4
Pārdevējs saņem naudu.
Pēc apstiprināšanas vai pēc verifikācijas perioda.
Atjaunināts: Skati: 96ID: 261507
Nosūtīt sludinājumu
Ziņojums

